Quattro LNB fra Inverto. For brukk med multiswitcher.
Advarsel: Siste vare på lager!
Specifically designed for the European DTH markets, this LNB provides optimized reception capabilities. It is designed to address the need to support multiple LNBs installations (on a single dish antenna). This LNB makes it possible to place two 40mm brackets on its prolonged neck. The LNB enables the reception of signals from one satellite and its distribution to maximum four Set Top Boxes with Single Tuner (or two STBs with Twin Tuner). Furthermore, it is ready for High-Definition transmissions and provides excellent Noise Figure performance. Designed to meet strict specifications and manufactured to the highest industry quality standards, this LNB is an ideal solution for satellite broadcast reception across Europe.
• Long Neck for Multi Satellite Reception Installations
• Low Phase Noise, DVB-S2 (HDTV) compliant
• Low Noise Figure
• Low Power Consumption
• High Cross Polarization Isolation • High Frequency Stability
Low Band Input Frequency Range 10.7 ~ 11.7 GHz
Low Band Output Frequency Range 950 ~ 1950 MHz
Low Band LO Frequency 9.75 GHz
High Band Input Frequency Range 11.7 ~ 12.75 GHz
High Band Output Frequency Range 1100 ~ 2150 MHz
High Band LO Frequency 10.6 GHz
Noise Figure 0.2 dB Typ. (0.7 dB Max.)
LO Initial Accuracy +/- 1.0 MHz Max.
LO Temperature Drift +/- 3.0 MHz Max.
Phase Noise (@ 10 kHz) - 90 dBc / Hz Max.
Conversion Gain 55 dB Min.
Gain Ripple (Over 26 MHz Bandwidth) +/- 0.75 dB
Gain Variation (Over Full Band) +/- 4 dB Max.
Image Rejection 40 dB Min.
1 dB Compression Point (@ Output) 0.0 dBm Min.
Cross Polarization Isolation 22 dB Min.
Control Signal Ca (Vertical Polarization) 10.0 ~ 14.0 V
Control Signal Cb (Horizontal Polarization) 16.0 ~ 20.0 V
Control Signal Cc (Band Switching) 22 +/- 4 kHz
Output VSWR 2.5 : 1
In-Band Spurious - 60 dBm Max.
Current Consumption 210 mA Max. @ 11 ~ 20 V
Operating Temperature - 30 °C ~ + 60 °C
Output Impedance 75 ?
Output Connector F-Type (Female)