Stab DiSEqC Motor HH120

Denne diseqc motoren kan kjøre antenner opp til  125 cm (aluminium) i størrelse.Slev har vi testet med en Gibertini aluminium 125 cm parabol.

Med motor installert i ditt parabolsystem kan du få inn et stort antall kanaler fra flere satellitter.Motoren er kompatibel med alle mottakere som støtter DiseqC 1,2 protokoll (Testet med DreamBox, Vu+, Miracklebox, Ab Ipbox og testet med andre mottakkerer som vi sleger og fungerer perfekt).

Rotor SAT HH100 - HH120 is a motor that enables any satellite dish to be pointed towards all visible satellites in the polar orbit.
The characteristics that make Rotor SAT HH particularly valid are as follows:
-Maximum precision.
-Mechanical robustness.
-Connection without external feeding, only by coaxial cable.
-Reduced dimensions.
-Maximum ease of installation
Rotor SAT HH is directly controlled by DiSEqC1.2 or USALS compatible receivers , where the rotation of the motor automatically begins when selecting the required channel. 
For all those receivers not provided with DiSEqC, STAB has developed the interfaces MS 220, MP 01, MP 02 to drive the motors only by Tv cable.

Operating protocol DiSEqC 1.2 
Maximum antenna diameter 120 cm 
Maximum antenna weight 17 kg 
Pole support diameter 50 - 83 mm 
Antenna support length 180 mm 
Antenna support diameter 54 mm 
Rotation angle ±62 ° 
Rotation speed 0,7°/s(18V);0,4°/s(13V) 
Operating power supply 13 / 18 Vdc 
Consumption in stand-by mode 30 mA 
Consumption in operating mode 190 mA 
Starting consumption (max) 350 mA 
Operating temperature -40°C ÷ +80°C 
Maximum relative humidity 100% 
Programmable positions (DiSEqC1.2) 49 satellites 
Preset positions (DiSEqC1.2) 28 satellites 
Programmable positions (USALS) No limits 
Connectors Type F 
Connection Coaxial Mechanical limits ±70° 
Software programmable limits 5° - 62° 
Fine tuning Pulse of 0,1° 
Inclination on the pole 15° - 70° 
Weight3,2 kg